A stand fan is basically a unit which increases the circulating air flow of a room by the use of an upright fan placed on the ceiling of a structure. The stand fan pulls air in at a low angle rather than prevailing straight winds and thus increases the internal air temperature. Standing fans can be used for circulating air both in and outside a room and are usually used for multiple purposes. You can use them for blowing away dust in the house from the window, as well as blowing the steam from your hot water heater. If you have a pool in your garden, it can become very difficult to cool the water and a standing fan can help greatly in reducing the amount of cooling required from the sun or even the heaters.
Most stand fans will have one or two fixed lengths extending out from the body of the fan. These sections are typically fitted with telescopic pole sections which enable them to be tilted or angled so that they can be adapted to any given room. The telescopic pole sections are also known as extension poles and are commonly made of aluminium or steel. Depending upon the space available and the intended purpose of the fan, you will require different lengths of extension poles. However, if you only have a small section of open wall left to work with, you can always opt for a simple bare minimum section, as long as it meets the safety requirements.
If you happen to live in a multi-story house or an apartment building, you need to ensure that you install your stand fan on an extension pole which is at least one floor high. This ensures that the fan can have good ventilation if you have a large open wall and will not have negative impact on the noise level in the adjacent rooms. If you live in a flat or a very small room, you can easily install your fan on a low-cost bare minimum extension pole which is commonly available from any home improvement centre. You do need to make sure that it extends all the way from the floor to the ceiling, as you would want the fan to exhaust any moisture in the room.
The bare minimum pole you should opt for should be approximately thirty-six inches in length and approximately eighteen inches in diameter. Bare minimum fans are ideal for bathrooms, kitchens, garages or storage areas in the home as they are small enough to fit anywhere. They also come with an adjustable tension wand to ensure that the unit does not pose a choking or tugging action on clothes near the base. They do not pose a health or fire hazard and they are also very quiet, which is very important in a household appliance.
If you wish to purchase a more expensive stand fan, you have the option of buying an extension pole which is made of stainless steel. If this is the case, it is advisable that you ensure that the extension wand is at least eighteen inches in diameter and that it has the ability to accommodate an eighteen inch fan. The majority of stand fans will come with a mounting kit, which consists of a three way pole with an optional one way pole adaptor. Most manufacturers will provide the necessary hardware and fittings but you may wish to ensure that you follow the instructions carefully to prevent damage to your fan.
When purchasing a new fan, whether it is an extension, replacement or new stand fan, it is essential that you consider all your options. This will allow you to ensure that you have enough space to install your chosen fan. Remember, it is important that you are able to ventilate your room and that you want a fan that will not only look great but work well too. There are a number of different manufacturers to choose from, so take time to research each one before making your final decision. You can save money by comparing various stores and products and this will ensure that you get the best deal possible.
English
한국어